The Software

The software - here's how it all works!

  1. Install hostapd, dhcp and the rest as per this beautiful guide: https://learn.adafruit.com/setting-up-a-raspberry-pi-as-a-wifi-access-point/install-software. Just replace any reference to eth0 to wlan1 instead.
  2. Connect to your WiFi with wlan as per this guide's references to wlan1: http://www.processthings.com/post/66023171876/how-to-connect-your-raspberry-pi-to-two-wi-fi
  3. Make the Pi run the Python script on boot.
    sudo nano /etc/rc.local
    and add
    sudo python /var/www/html &
    right before the exit-line.
  4. Oh, and btw, download and place the following code repository at /var/www/html: https://github.com/nyweb/record.